Cordless Circular Saw - ST CCS-S20Li Manual Del Usuario

CORDLESS CIRCULAR SAW

ININTENDED USE
This cordless circular saw (hereinafter "appliance") is designed for longitudinal, cross and mitre cuts in firmly supported solid
wood, chipboard, plastics and lightweight construction materials. Any other uses of or modifications to the machine are deemed
to be improper usage and may result in serious physical injury. Not for commercial use.
TECHNICAL SPECIFICATIONS
NOISE/VIBRATION INFORMATION
●
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Read the manual.
Wear eye protection
Electrical
disposed of with the domestic waste.
PRODUCT ELEMENTS
1 Safety lock-out
3 Cutting depth scale
5 Battery charge level button/battery display LED
7 Locking screw
9 Base plate
Auxiliary handle
12
Wing screw for cutting angle pre-selector
16
18 Rip fence
20 Clamping flange
22 Release lever for the blade guard
24 Chip ejector
SAFETY
appliances must not
Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Wear ear protection.
Wear breathing protection
be Protection class II
2
4
6
8
10
15
17
19
21
23
26
ON/OFF switch
Release button for battery pack
Battery pack
Spindle lock
Rip fence slot
Cutting angle scale
Wing screw for rip fence slot
Blade guard
Clamping screw
Saw blade
Hex key