Getting Started; Operating This Unit; About Operation Mode - Sony XDP-210EQ Manual De Instrucciones

Getting Started

Operating this unit

You can control this unit by a Sony Master
unit.
Some master units have (+)/(–) (volume)
buttons, and some have a dial.
This instructions shows as follow.
Rotate/press (+) or (–).
Note
There may be a difference between the display items of this
manual and the master unit.
Note in operation
•The unit has a digital volume control system.
Do not down the volume of the master unit
too much as doing so may cause the sound
quality to deteriorate.
•When you connect this unit to the master
unit, the loudness function will not work.
•The sound becomes unclear in some
situations (such as when the BAS, TRE or EQ
are excessively boosted).
•Two units can not be used at same time.

About operation mode

This unit has three operation modes.
Sound Control Mode
Select the item or adjust it partially.
•EQ (Graphic Equalizer): Select the equalizer
curve.
•POS (Listening Position): Select the listening
position.
•SUB (Subwoofer): Adjust the subwoofer
volume level.
Sound control mode can adjust not only BAS,
TRE, BAL, FAD but also VOL. For further
details, read the master unit instructions.
Sound Tuning Mode
Tune in the item selected in the Sound Control
Mode exactly.
•EQ (Graphic Equalizer): Setting and
registering the equalizer curve.
•POS (Listening Position): Adjust the
listening position.
•CNW (Cross Over Network): Adjust the cut-
off frequency.
Name Edit Mode
EQ (Graphic Equalizer): Naming the equalizer
curve.
EN
3