GE UX12BS36PSS Instrucciones De Instalación

Installation
Instructions
WARNING
To prevent ignition of combustible
materials, the entire back wall above the range
must be protected by a backsplash constructed of
non-combustible material.
This stainless steel backsplash accessory must be
installed in combination with a custom, non-combustible
backsplash built beyond the 12" height of the backsplash.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
Note to Installer — Be sure to leave these
instructions with the consumer.
Note to Consumer — Keep these instructions with
your Owner's Manual for future reference.
This kit provides for the installation of a 12" high
backsplash for 36" and 48" Professional Ranges and
Rangetops.
TOOLS AND MATERIALS REQUIRED
screwdrivers
This Kit Includes
31-2000883 Rev. 0 12-21 GEA
— Save these instructions
— Observe all governing
Package
UX12BS36PSS, UX12BS48PSS
12" High Backsplash
INSTALL 12" BACKSPLASH
WARNING
fastened to the wall. Failure to do so could result in
damage or personal injury.
range hood according to the installation instructions.
film.
cover panel to overlap the wall support panel.
available, plan to use wall anchors (not provided).
anchors (not provided) to secure the support panel
to the wall.
screws on each side.
Support
Panel
This backsplash must be securely
Panel
Arrow
Screws