Safety Instructions And Precautions - Kinderkraft LUNKY Manual De Usuario

Alle Rechte an dieser Studie liegen vollständig bei 4Kraft Sp. z o. o. Jede nicht autorisierte Verwendung, die
ihrem beabsichtigten Zweck widerspricht, insbesondere: Verwendung, Kopieren, Reproduktion, Weitergabe
- ganz oder teilweise ohne Zustimmung von 4Kraft Sp. z o. o. kann rechtliche Konsequenzen haben.
Thank you for choosing a product by Kinderkraft. Our designes are child-oriented – safety and quality always
comes first, stay comfortable knowing that you have made the best choice.
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY

SAFETY INSTRUCTIONS AND PRECAUTIONS

WARNING
•
Be aware of the risk of open fire and other sources of strong heat, such as
electric bar fires, gas fires, etc. in the near vicinity of the cot;
•
Do not place this child's bed near heat sources, windows and other furniture.
•
Do not use the cot if any part is broken, torn or missing and use only spare parts
approved by the manufacturer; spare parts may be only delivered by
manufacturer.
•
Do not leave anything in the cot or place the cot close to another product, which
could provide a foothold or present a danger of suffocation or strangulation, e.g.
strings, blind/curtain cords. Another products should be placed either tight to
any wall or have a gap of 300 mm between the wall and the side of the bed;
•
Do not use more than one mattress in the cot.
•
The lowest position of the base is the safest. When a child starts to sit down
without the assistance – use only this level.
•
Thickness of the mattress shall be such that the internal height (measured from
the top of mattress to the upper edge of the cot frame) was at least 500 mm in
the lowest position of the cot base and at least 200 mm in the highest position of
the cot base.
•
Maximum thickness of the mattress: 9 cm.
•
Mattress should have size 120 x 60 cm. Length and width shall be that there shall
be no gap more than 30 mm between the mattress and the sides and ends.
•
All assembly elements and fittings should be tightened properly and checked
regularly and retightened as necessary.
EN
Dear customer
13