Wall Mounting - Teac MC-DX20 Manual Del Propietário

C
Subwoofer
Make the connection between the "TO SUBWOOFER" and
"FROM MAIN" sockets using the supplied cable.
D
AUX IN
You can connect a DVD player, VCR etc. to this unit.
Connect the component with RCA pin cords.
Make sure to connect the white plug to the white jacks
(Left) and the red plug to the red jacks (Right).
E
SPEAKERS
Connect the left speaker's plug to L, and the right speaker's
plug to R.
< When using speakers other than those supplied with the
system, the impedance should be 3 ohms or more.
< Do not connect anything other than speakers to these
terminals.
F
AC Power Cord
Plug this AC power cord into an AC wall socket.
All manuals and user guides at all-guides.com
You can mount the main unit and/or the left and right speakers
on a wall.
Precautions
< Be aware that the length of the cables are approximately 10
< Drill holes into solid wall support, such as wooden frame or
< TEAC supplies these brackets as a convenience to the product
To hook on the wall
1
2
< As a convenience, a set of tapered plastic anchors is supplied.
Note:
3

Wall Mounting

feet (3 m). Do not attempt to mount the main unit and the
speakers too far from the subwoofer.
concrete wall.
owner. Consult your local building codes and exercise all
necessary caution when mounting these brackets. If you are
unsure how to use the supplied brackets, consult with a local
tradesmen or building supply expert.
Use the supplied template to determine drilling points.
Secure the brackets on the wall using the supplied screws.
If you chose to use these anchors, drill a pilot hole using
either a 1/4" or 6mm drill bit then tap the anchor into the
pilot hole.
Only use these anchors if they are appropriate for the
materials onto which the unit is to be mounted. Consult your
local hardware store if you are uncertain.
Before going on, make connections between the main unit
and the speakers by referring to page 4.
Hang the main unit and/or the speakers to the mounting
tabs.
Main Unit
3
2
Speaker
3
2
5