Becken baby BBM3554 BU Manual De Instrucciones página 14

recommend the parent unit is at least 1.5 meters away from the baby
unit to avoid audio feedback. If you still experience audio feedback,
move the parent unit and the baby unit farther apart.
Note: If the signal is poor, try moving the parent and/or the baby unit
to different positions in the rooms.
It is the caregiver's responsibility to stay close enough to take
care of any eventuality.
Test your audio monitor before use
It is important to test the audio monitor when it is initially installed, and
regularly thereafter. Test your parent unit and baby unit if they have
not been used for a long time or you suspect they are defective.
To test your audio monitor:
1. Place the parent unit and the baby unit in the same room to test the
product. Make sure the baby unit is at least 1.5 meters away from the
parent unit.
2. Press and hold
turns on.
3. Press and hold
on steadily. The parent unit plays sound detected from the baby unit.
Your audio monitor is now ready for use.
Note: If no connection can be established, the Power indicator light on
the parent unit flashes in green.
Using your baby monitor
Power the baby unit on or off
• Press and hold
indicator light turns on.
• Press and hold
Power indicator light turns off.
14
AF Manual de Instruç o ̃ e s Baby Monitor BBM3554 A5.indd 14
on the baby unit until the Power indicator light
on the parent unit until the Power indicator turns
for 2 seconds to turn the baby unit on. The Power
for 2 seconds again to turn the baby unit off. The
30/08/2019 10:48