Knowyourpressure Washer - Craftsman 580.750700 Instrucciones De Uso

KNOWYOURPRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Comparethe illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
A - Spray Gun -- Controls the application of water onto
cleaning surface with trigger device, includes trigger lock.
g - Recoil Starter -- Used for starting the engine manually.
C - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
D - Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
E - Primer Bulb -- Preparesa cold engine for starting.
F - High Pressure Hose -- Connectone end of hose to water
pump and the other end to spray gun.
6 - Water Inlet -- Connection for garden hose.
H - Pump -- Develops high pressure.
J - Spray Tips -- Detergent, 0° and 25°: for various pressure
cleaning applications.
I( - Detergent Siphoning Tube-- Useto siphon pressure
washer safe detergentsinto the low pressurestream.
L =Automatic Cool DownSystem -- Cycleswater through
pump when water reaches above 125°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
M - High Pressure Outlet-- Connectionfor high pressure
hose.
N - Engine Identification -- Provides model, type and code
of engine. Pleasehave these readily available if calling for
assistance.
P - Throttle Lever-- Sets engine in starting mode for recoil
starter and stops a running engine.
R - Warning/Operating Instructions Tag -- Identifies hazards
and proper procedureto start/stop pressurewasher.
S - Oil Fill/Dipstick -- Check, add and drain engine oil here.
T - Nozzle Extension with QuickConnect -- Allows you to
switch between three different spray tips.
Items Not Shown:
Identification Label (under front of base plate) -- Provides
model and serial number of pressure washer. Pleasehave
these readily available if calling for assistance.