Cooling Circuit; Cooling System; Condition Of The Tyres - SHERCO X-RIDE 125 Manual Del Propietário

MAINTENANCE PROCESSES

Cooling circuit

The cooling system can be filled at the radiator itself, the filling spout (1) is
located on the left side.
Beside the radiator cap is the safety valve (2) which should not be tampe-
red with as it is set by the manufacturer.
ATENCIÓN
Perform this operation when the engine is cold.
ALWAYS use antifreeze.

Condition of the tyres

The handling of the motorcycle is influenced by the tire air pressure.
Always adjust the tire air pressure correctly.
Front tyre pressure: MAX. 1.2 – MIN. 0.6
Rear tyre pressure: MAX. 1.4 – MIN. 0.8
ATTENTION
Avoid riding the machine if the minimum tread is not greater than 2 mm.
53
owner's manual
X-RIDE 125/290
X-RIDE125/290 X-RIDE125/290
2 1
Tyre in good condition