SHERCO X-RIDE 125 Manual Del Propietário página 56

X-RIDE125/290 X-RIDE125/290
MAINTENANCE PROCESSES
- Remove the axle shaft (4) out the right side.
- Remove the front wheel, take it out forward very gently in order
to avoid damaging the disc and the pads.
To refi t the front wheel:
- Proceed in reverse order to the removal.
ATTENTION
Clean and lubricate the shaft before reassembly.
TIP
During the process do not press the brake lever. If the brake lever is pres-
sed, the brake pads will have to be compressed in order to reinstall the
wheel. If necessary, refi ll with brake fl uid and bleed the corresponding
circuit.
WARNING
Take care when inserting the wheel to ensure that the disc is not dama-
ged by the brake pads.
Once everything is fi tted, check the correct brake operation before riding
the machine.
4
Front wheel shaft
Front brake disc
owner's manual 56
X-RIDE 125/290