4.2 Overview
Frontpanel
1. Mode Button
This button will change the operate mode between DMX and chaser.
2. Menu Button
This button will activate the different functions in DMX and chase modes.
3. Up Button
This button will increase the displayed value in the LCD display.
4. Down Button
This button will decrease the displayed value in the LCD display.
5. Green L.E.D. Indicators
These LEDs will indicate their relevant channel activity.
6. LCD Display
This multifunction display will detail all chasers and programs that pertain to the current operating mode of
the pack.
7. Channel Fuses
Each of the four channels is protected by a 6.3A fuse. These fuses prevent you from overloading and
damaging your pack. Be sure to always replace with the exact same type fuse.
8. Circuit breaker: 16A
Rearpanel
9
10
11
12
1. Power Output
Four channel output.
2. DMX Input
This connector accepts your DMX input signal.
3. DMX Output
This connector sends your DMX input signal through to the next DMX device.
4. Power Input
The main power input.
13/28
70064223_V_1_0.DOC