VBM REPLICA PISTONE Manual De Instrucciones página 72

2
3
32
11.1,
2
REPLACING THE SPRAY HEAD.
1
The spray head (1) has to replaced at least once a month operating as follows:
•
Use a screwdriver to prise out the spray head (1) and remove it and the relative
gasket from the unit (2).
•
Replace the spray head (1) and the gasket (3).
•
Refit the gasket on the spray head taking care that the rounded part "A" of the
gasket faces up.
•
Place the spray head on the filter holder.
A
1
•
Mount the filter holder (3) on the unit (2) first on the left-hand tab turning it until
it fits into place and then on the right-hand tab.
•
Mount the filter holder on the machine as if you were making coffee and move
it into position to lock the spray head with the gasket into place.
3
2
3
11,
CHECKS AND REPLACEMENTS.