HQ-Power VDPL1503MHW12 Manual Del Usuario página 7

display
view
DMX Mode
This mode allows you to control the fixture by any universal DMX controller.
• All DMX-controlled devices need a digital start address so that the correct device responds to
the signals. This digital start address is the channel number from which the device starts to
"listen" to the DMX controller. The same starting address can be used for a whole group of
devices or an individual address can be set for every device.
• When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
• In case of the 12-channel VDPL1503MHW12, you will have to set the start address of the
first unit to 1 (CH1~12), the second unit to 13 (1 + 12) (CH13~24), the third to 25 (13 + 12)
(CH25~36), and so on.
• Press <MENU> until
• Use <UP> or <DOWN> to set the DMX starting address (
DMX Channel Values
channel function
1 shutter/strobe
2 dimmer
3 RGB macro
4 RGB macro speed
5 pan
6 tilt
7 tilt fine
8 pan fine
9 pan/tilt speed
10 red LEDs
11 green LEDs
12 blue LEDs
7. Cleaning and maintenance
• All screws should be tightened and free of corrosion.
• The housing, the lenses, the mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections ...
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts, apart from the fuse.
• Contact your dealer for spare parts if necessary.
8. Technical specifications
power supply
LEDs
power consumption
dimensions
weight
fuse
15/11/2011
VDPL1503MHW12
display visible
display blanked out
is displayed.
from to
000 007 shutter closed
008 231 strobe slow -> fast
232 247 shutter closed, device resets after 5 seconds
248 255 shutter open
000 255 master dimmer
000 007 RGB dimmer active (CH10, CH11 & CH12)
008 199 macro
200 255 rainbow effect
000 255 slow -> fast
000 255 rotate head horizontally
000 255 move head vertically
000 255 move head vertically – small increments
000 255 rotate head horizontally – small increments
000 255 fast -> slow
000 255 dimmer 100% -> 0°
000 255 dimmer 100% -> 0°
000 255 dimmer 100% -> 0°
230Vac / 50Hz
3W Edison high power RGB 3-in-1 (12x)
100W
279 x 274 x 413mm
10kg
5A / 230VAC (FF5N)
7
~ ).
description
©Velleman nv