Fueling - Stihl TS 410 Manual De Instrucciones

English

Fueling

Before fueling, clean the fuel filler cap
and the area around it so that dirt cannot
fall into the tank.
Thoroughly shake up the mixture in the
canister before fueling your machine.
WARNING
To avoid the risk of fire or other injuries
due to escaping gasoline vapors, open
the fuel filler cap carefully so that any
excess pressure in the tank can escape
slowly.
WARNING
Never use a tool to open the bayonet
cap. This could damage the cap and
cause fuel to leak out.
Do not spill any fuel and do not fill the
tank up to the brim.
32
Open the fuel filler cap
1.
2.
Press the cap down with your hand as
far as possible, turn it counterclockwise
(approx. 1/8 turn) and remove it.
Close the fuel filler cap
1.
2.
Fit the cap and turn it until it
N
engages in the bayonet mount.
Press the cap down with your hand
N
and turn it clockwise
(approx. 1/8 turn) until it engages
completely. Check cap for
tightness.
Checking the lock of the fuel filler cap
Grip the cap – the cap is closed
N
properly if it cannot be removed and
the markings (arrows) on the cap
and fuel tank are aligned
If the cap can be removed or the
markings do not align, close the cap
again – see sections "Close the fuel filler
cap" and "Checking the lock of the fuel
filler cap".
TS 410, TS 420