Stihl TS 410 Manual De Instrucciones página 37

When the engine has turned over for the
first time
4
Set the choke lever (4) to f
N
Press the button of the
N
decompression valve (depending
on version)
continue cranking
N
Once the engine is running
Squeeze throttle trigger fully and let
N
engine run at full throttle for
approx. 30 s
When it has warmed up, set the
N
choke lever to e
3
The slide control (3) moves to the
N
normal positionF when the throttle
trigger is squeezed
TS 410, TS 420
If the carburetor has been set correctly,
the abrasive wheel should not rotate
when the engine is idling.
The cut-off machine is now ready for
use.
Switching off the engine
3
Slide control (3) toSTOP or 0
N
Additional hints on starting
If the engine does not start
The choke lever was not returned to f
in time after the engine turned over for
the first time.
Slide control to START = starting
N
throttle position
Set the choke lever to e = warm
N
start, even if the engine is cold
Pull the starter rope through 10-20
N
times to ventilate the combustion
chamber
Restart the engine
N
If the tank has been drained completely
Refuel
N
Press the manual fuel pump bulb
N
7-10 times – even if it is full of fuel
Set the choke lever in accordance
N
with the engine temperature
Restart the engine
N
English
35