GEHA top secret 400 Instrucciones De Servicio página 11

Geha top secret 400
4 Operation
Switching the paper shredder on
• Set mains switch at rear of paper
shredder to „I".
 Green LED lights.
 Paper shredder is ready for opera-
tion (standby)
Notice
Safety switches are installed at the
door. Paper shredder can only be
switched on if the door is closed.
Feed paper
Swit ching paper shredder off
• Set mains switch at rear of paper
shredder to „0".
1003
• Feed paper. See „Tech-
nical data" for sheet
capacity.
 The shredding pro cess
is star ted by a pho to –
cell in the paper feeding
opening.
 When the paper fee-
d opening is free again,
the cut ting sy stem au-
to ma tical ly swit ches off
af ter app rox. 3 sec. and
returns to standby.
The document shredder can also be
started by pressing the green arrow
button:
• Press briefl y:
Cutting device starts.
Automatic stop approx. 3 seconds
after the last piece of paper was
drawn in, or manual stop when the
stop button is pressed.
• Hold down for longer than 2 sec-
onds:
constant operation without light bar-
rier function.
The cutting device runs until it is
switched off with the stop button.
Destroying credit cards, CDs, discs or
DAT cassettes:
Cross cut machines:
Fold the safety element down (only for cutting
types 3.9 x 50 mm and 1.9 x 15 mm), switch the
machine on to continuous operation and feed
the material into the insertion slot.
only for cutting type
3.9x50 mm 3.9x50 mm • 1.9x15 mm
Floppy disks Credit cards + CDs
For strip cut machines, feed the CDs, credit
cards or discs directly into the paper feed slot.
only for cutting type
3.9x50 mm
DAT cassettes
11