Getting Started - TFA Dostmann 30.5038 Instrucciones De Uso

TFA_No. 30.5038_Anleit_03_17
Digital thermo-hygrometer
A 4: Indoor temperature, MAX/MIN
A 5: Indoor humidity, MAX/MIN
A 6: Symbol comfort level
B: Buttons:
B 1: SNOOZE button
B 3: UP button
B 5: °C/°F button
C: Housing:
C 1: Support with battery compartment

6. Getting started

• Open the battery compartment and insert a new battery 1,5 V AA, ensure that the
battery polarity is correct.
• Close the battery compartment again.
• All LCD segments will be displayed for a short moment.
• The unit is ready for use.
• The display shows the current indoor temperature and humidity.
• Next to the time (12:00 default) AM appears on the display.
• Remove the battery to shut down the instrument.
7. Operation
• Press and hold UP button in the setting mode for fast running.
• The instrument will automatically quit the setting mode if no button is pressed within 60
seconds.
16
03.03.2017 12:05 Uhr
B 2: MODE button
B 4: MEM button
B 6: RESET button
Seite 9
Digital thermo-hygrometer
7.1 Setting of the clock and calendar
• Press and hold the MODE button.
• The minute digits will be flashing.
• Press the UP button to set the minutes.
• Press the MODE button again and the setting sequence is shown as follows: Hours, 12-
hour or 24-hour display format (AM or PM after 12 h appears on the display) month and
day and adjust it with the UP button.
• Confirm the setting with the MODE button.
• The display shows the current time.
7.2 Setting of the alarm time
• To enter the alarm mode, press the MODE button in normal mode.
• 0:00 (default) or the last adjusted alarm time appears on the display.
• Press and hold MODE button.
• The alarm symbol appears and the minute digits will be flashing.
• Press the UP button to set the minutes.
• Confirm the setting with the MODE button and set the hours in the same way.
• Confirm the setting with the MODE button.
• The display shows the adjusted alarm time and the alarm symbol. The alarm is activated.
• Press the MODE button again to return to the current time.
• When the adjusted alarm time is reached, the alarm will ring.
• Press any button to stop the alarm.
• If the alarm is not stopped manually, the increasing alarm will automatically turn off after
certain minutes and will be reactivated at the same time.
• The alarm symbol stays in the display.
17