Care & Maintenance - Aquaglide SPIRE 6.8 Manual Del Usuario

CARE & MAINTENANCE
Proper cleaning, maintenance, and storage is essential to help prolong the life of your product. Do not use
petroleum-based cleaners on this product. Improper use of a pressure washer can damage or destroy the
product.
Basic Cleaning: Use soft bristly brush or sponge with mild soap and fresh water.
Difficult Cleaning: For heavy stains, marine growth, algae, mold, dirt and oils check with your distributor, or
on our website, Aquaglide.com for commercial-grade cleaning solutions.
UV Protectant: Long-term exposure to sunlight will reduce product life and can damage the product.
Regularly apply a UV protectant to exposed surfaces to ensure the life of your product. Find more information
on professional-grade UV protectants from your distributor, or on our website, Aquaglide.com.
Replacement parts: Items like valves, PRV's, handles, rings and other accessories can occasionally wear
out and need replacement to maintain the full function of your product. Check with your distributor, or on our
website, Aquaglide.com for available parts and replacement instructions.
STORAGE
Clean, Protect, Dry: Clean product and consider applying UV protectant before storage. UV protectant
conditions the PVC material and will help protect against dirt accumulation during storage. Confirm
product is completely dry before folding.
Deflate & Fold: Deflate product completely: Consider using electric pump in 'deflate' mode. Close valve
to prevent air return. Fold deflated product in similar manner to original packaging. If uncertain, fold in
thirds, then roll loosely toward the valve(s). Enclose product in original storage wrap, if included.
Storage: Store the product out of direct sunlight and protect from environment in a clean, dry location
such as a sealed closet, crate or container to prevent against serious threat of rodent damage. When
building or sourcing storage container, use original box dimensions as a baseline. Size up by at least 15-
20% to allow for imperfect folding. Never store in a damp location or at temperatures below 40 F (4 C).
Spire 6.8 is a floating climbing/ play structure for use in water. Users may climb around, through and over
product. Users may jump into water feet-first. Do not immediately follow other users into water. Wait for
water to clear before jumping.
PVC surfaces are slipperier when wet, which can lead to loss of balance when walking or climbing.
Maintain Working Pressure: Air pressure is temperature dependent. Always confirm proper working
pressure before and during use as changing temperatures may affect the internal pressure. If product
shows signs of instability or pressure loss, discontinue use until product is returned to working pressure
and/or repairs made.
Disperse loads: Do not concentrate more than 300lb (136kg) in any one area during use.
Manage Winds/ Storms: If strong winds (25kts +) or storms are expected, discontinue use. Remove
product from water and secure or store it.
Check Connections: Regularly check to confirm that all connections are secure. Replace any
connecting straps showing any signs of wear.
Clean & Maintain: Regularly check to confirm product is clean and all handles & accessories are
functioning properly. Each site requires its own cleaning/ maintenance schedule, but regular cleaning and
periodic maintenance is required to ensure full product life. Replace any handles or accessories showing
signs of wear.
Check Moorings: Regularly check mooring lines and anchors, especially after extreme conditions.
Replace any items showing signs of wear or permanent stretching.
9
OPERATION
www.aquaglide.com