How To Take A Reading - Forehead - HealthSmart 18-545-000 Guia Del Usuario

How To Take A Reading - Forehead

NOTE: Make sure the measurement sensor is clean before taking a reading.
Be sure the thermometer is set to measure the temperature of a person.
Attempting to take a measurement anywhere else on the body may result in an
inaccurate reading.
1. If the thermometer is OFF, press any button to turn it ON.
The screen should display the ambient temperature, Fig 1.
2. Aim the front of the thermometer at the middle of the
person's forehead, Fig. 2. Hold the thermometer
approximately 0" ~ 2" (0~5 cm) away from the forehead.
3. Press and hold the SCAN button. The screen should appear
like Fig. 3 and is ready to begin taking a measurement.
4. While continuing to hold the SCAN button, slowly move
the thermometer toward or away from the person's
forehead. You will hear a 'beeping' sound until the
thermometer is at the correct distance. Once the beeping
stops, hold the thermometer still as it is taking the
measurement.
5. The thermometer will make a final 'beep' , indicating the
measurement is complete and display the result on the
backlit LCD screen.
6. After the test is complete, press the M (Memory) button or
wait 1 minute for the display to return to standby mode and
display the ambient temperature. After 1 minute in standby
mode, the thermometer will automatically shut OFF.
NOTE: The LED light around the SCAN button will illuminate according to the
temperature reading.
• GREEN = 93.2°F ~ 100.3°F (34.0°C ~ 37.9°C)
• RED = 100.4°F ~ 109.3°F (38.0°C ~ 42.9°C)
• LO = < 89.6°F (32.0°C)
• HI = > 109.3°F (42.9°C)
9
FIG. 1
0"~2"
FIG. 2
FIG. 3