i-tec U3HUBMETAL4 Manual De Instrucciones página 6

EN Quick Start / USB 3.0 Metal Charging HUB 4 Port
INTRODUCTION
i-tec USB 3.0 Metal Charging HUB will immediately catch your attention
thanks to its elegant metallic design. It is an ideal companion for everybody
who does not have enough USB ports in his/her notebook, ultrabook or PC
and who has to constantly connect and disconnect his/her favorite USB
equipment such as flash disks, mobile phones, tablets, digital cameras,
MP3 players, printers, etc.
This HUB offers 4 USB 3.0 ports with the Plug & Play function and standard
USB charging – the HUB will automatically detect connected equipment
for USB charging. One of the advantages is that thanks to their placement
you have enough space even for connection of large pieces of equipment.
The USB 3.0 interface is important mainly for data transfers from USB 3.0
memory cards and flash disks which will use its high transfer speed most.
The advantage is included external power adapter which you can use for
backing up data on external hard drives or for connecting high power
consumption devices which are powered directly from the USB port.
This HUB does not require installation of drivers. You will just connect it
by the USB cable to your computer and immediately you can start using it.
This HUB has a built in overcurrent protection of your computer in case of
short connection on the peripheries. The interface is compatible with USB
2.0 / 1.1.
Thanks to its compact dimensions and low weight it is an ideal companion
to your notebook when traveling.
INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10, MAC OS X AND HIGHER
The HUB is installed automatically, no need install drivers. Connect the
connector of the power adaptor to the HUB and connect the power adaptor
to a socket outlet with 230V. Then plug the HUB via USB cable into available
USB port (USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and follow the
on-screen instructions. The HUB will be installed and displayed in Device
manager as "USB 3.0 HUB" and "USB 2.0 HUB".
6