Model 1832 | Owner's Manual |
Assembly Guide
S T E P 0 5
positioning pegs on the griddle top are seated into the griddle body. Place the
grease cup on the rear of the griddle.
S T E P 0 6
tank clockwise.
10
Place the griddle top on the griddle body. Make sure the four
Screw in the LP bottle into the gas regulator, turning the
S T E P 0 7
CLEANING THE GRIDDLE COOKING SURFACE
Insert the gas regulator and tank into the gas line of the griddle.
Turn the collar of the gas regulator clockwise to secure it to the gas line.
S T E P 0 1
each use, cool griddle below 300° F.
Scrape food debris with spatula or
straight metal scraper.
S T E P 0 2
surface with paper towel.
S T E P 0 3
into approximately 6" sections
(width of scraper tool). Apply a
small amount of water onto first
section with a bottle and then
scrape the water and debris toward
S T E P 0 8
Proceed to the Griddle Seasoning Instructions section
the grease trap. Move to the next 6"
of the Care & Maintenance chapter. Enjoy cooking outdoors on your
section and repeat.
Blackstone 17" Tabletop Griddle!
DO NOT USE MORE THAN TWO
TABLESPOONS OF WATER
AT A TIME.
1/4 cup of table salt may be used to
buff off stuck food residue.
S T E P 0 4
paper towel and dry completely.
S T E P 0 5
cooking oil to maintain seasoning
and protect the griddle top.
Care & Maintenance
Assembly Guide
| Owner's Manual | Model 1832
!
WA R N I N G
NEVER APPLY COLD
WATER ACROSS THE
WHOLE SURFACE OF A
HOT GRIDDLE AT ONCE.
This may cause warping.
To clean griddle after
!
C A U T I O N
DO NOT USE SOAP ON
THE GRIDDLE COOKING
SURFACE. This will destroy
the griddle's seasoning.
Wipe down griddle
Divide griddle surface
Wipe again with a
NEED HELP?
Register your Blackstone product at
blackstoneproducts.com/register and
contact Blackstone Customer Service for
missing parts, assembly and operation
questions:
PHONE:
Apply thin coat of
435-252-3030 ext 1
EMAIL:
support@blackstoneproducts.com
ONLINE:
blackstoneproducts.com/pages/support
11