TLR 22 3.0 Spec Racer Manual De Usuario página 54

TLR232060
TLR232057
TLR2958
Part # English
TLR234051 Front Pivot, w/Brace & Kick
Shims: All 22
TLR234052 Front Hinge/King Pin Set:
All 22
TLR234053 Rear Hinge Pin Set: 22 3.0
TLR234054 Rear Pivot Block Set, LRC,
Aluminum: 22 3.0
TLR234055 Rear Suspension Insert Set,
Toe/Anti-Squat: 22 3.0
TLR234056 Rear Shock Tower: 22 3.0
TLR234057 Rear Camber Block, w/Inserts:
22 3.0
TLR234058 Rear Hub Carrier, w/22 Std
Hex (2): All 22/T
TLR234059 Turnbuckle, HD, 50mm (2):
22/22-4
TLR234060 Turnbuckle, HD, 55mm (2):
22/22-4
TLR235005 Flat Head Screws, M3 x
18mm (10)
TLR236001 4mm Low Profi le Serrated
Nuts (4)
TLR237000 5x8x2.5mm Bearings (2)
TLR2947 Tungsten Carbide Diff Balls,
2mm (6)
TLR2951 Tungsten Carbide Diff Balls,
3/32mm (14) 22/T/SCT
TLR232056
TLR2954
TLR237000
TLR2953
Deutsch
TLR 22 3.0 Querlenkerhalter
vorne und Unterlegscheiben
TLR 22 3.0 Hinge Pin Set
vorne: alle 22/T
TLR 22 3.0 Hinge Pin Set
hinten: 22 3.0
TLR 22 3.0
Querlenkehrhalterset hinten
LRC. Aluminium 22 3.0
TLR 22 3.0 Anti-Squat
Einsätze hinten
TLR 22 3.0 Dämpferbrücke
hinten
TLR 22 3.0
Sturzstangenbrücke hinten mit
Einsätzen
TLR 22 3.0 Radträger hinten m.
22 Std Inbus
TLR 22 3.0 Gewindestange
HD, 50mm (2) : 22/22-4
TLR 22 3.0 Gewindestange
HD, 55mm (2) : 22/22-4
TLR: Flachkopfschrauben, M3
x 18mm (10)
TLR: Flache Riffelschrauben
4mm (4)
TLR 5 x8x2.5mm Lager (2)
TLR Tungsten Carbide Kugeln,
2mm (6)
TLR Tungsten Carbite Kugel
3/32 (14)
TLR2951
TLR237000
TLR2954
TLR232056
Français Italiano
22 - Pivot avant avec cales et Perno anteriore, c/rinforzo &
renforts distanziale per kick: tutti i 22
22 - Axe de suspension avant Set cerniera anteriore/perno:
tutti i 22
22 3.0 - Axe de suspension Set perno cerniera posteriore:
arrière 22 3.0
22 3.0 - Cales de pincement Set blocco perno posteriore,
arrière, LRC, Aluminium LRC, alluminio: 22 3.0
22 3.0 - Inserts de cales de Set inserto sospensione
pincement posteriore, convergenza/anti-
squat: 22 3.0
22 3.0 - Support Torre ammortizzatore
d'amortisseurs arrières posteriore: 22 3.0
22 3.0 - Cales de carrossage Blocco camber posteriore, c/
arrière inserti: 22 3.0
22/T - Fusées arrières avec Supporto mozzo posteriore,
hexagones standard 22 c/22 Std Hex (2): tutti i 22/T
22/22-4 - Biellettes, renforcées, Tenditore, HD, 50mm (2):
50mm (2) 22/22-4
22/22-4 - Biellettes, Tenditore, HD, 55mm (2):
renforcées, 55mm (2) 22/22-4
Vis à tête fraisée M3x18mm Viti a testa piatta M3 x 18mm
(10) (10)
Ecrous striés M4 taille basse Dadi dentellati a basso profi lo
(4) 4mm (4)
Roulements 5 x 8 x 2.5mm 5 x 8 x 2.5mm cuscinetti (2)
Billes de différentiel en Sfere diff. al carburo di
carbure de tungstène, 2mm tungsteno, 2mm (6)
(6)
Bille de différentiel en carbure Sfere diff. al carburo di
de tungstène, 3/32 (14) tungsteno, 3/32mm (14)
22/T/SCT
TLR2947
TLR2958
TLR232057
Español
Pivote Delantero, con Brazo
y Arandelas de Cuña: Todos
los 22
Pasadores Delanteros/
Tornillos Mangueta: Todos
los 22
Pasadores Trapecios Traseros:
22 3.0
Soporte Trasero de Pivote,
LRC, Aluminio: 22 3.0
Casquillos Suspensión Trasera,
Convergencia/Anti-Squat:
22 3.0
Torreta Amortiguador Trasero:
22 3.0
Soporte Trasero Camber, con
Casquillos: 22 3.0
Mangueta Trasera, con
Hexágono Estándar 22 (2):
Todos los 22/T
Tirante, HD, 50mm (2): 22/22-4
Tirante, HD, 55mm (2):
22/22-4
Tornillo cónico 3 x 18mm (10)
Tuercas Serradas Bajo Perfi l
4mm (4)
Rodamientos 5x8x2.5mm (2)
Bolas axial carburo de
tungsteno 2mm (6)
Bolas diferencial carburo de
tungsteno 3/32" (14) 22/T/
SCT