Battery Replacement - Tripp-Lite SmartPro SLT Manual Del Propietário

Ocultar thumbs Ver también para SmartPro SLT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

201111068 93-3154.qxd

Battery Replacement

Battery Replacement Door: Under normal conditions, the original
battery in your UPS will last several years. Battery replacement should be
performed only by qualified service personnel. Refer to "Battery
1
Warnings" in the Safety section. Should your UPS require battery
replacement, visit Tripp Lite on the Web at www.tripplite.com/support/
battery/index.cfm to locate the specific replacement battery for your UPS.
1
2
2
3
3
4
11/4/2011
2:55 PM
Page 8
Carefully pull the front panel away from the UPS.
Place front panel on top of the unit. Remove the battery support bar.
Remove old batteries.
Carefully pull the batteries from the UPS and disconnect them.
Connect new batteries.
Connect the new batteries in exactly the same manner as the old
ones: positive (red) connectors together and negative (black)
connectors together. Carefully push batteries back into the UPS.
Reassemble UPS.
Reinstall the battery support bar and replace the front panel.
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Smart750sltSmartpro slt smart1500sltSmartpro slt smart1050sltSmartpro slt smart750sltSmartpro slt serieSmartpro smart1500slt

Tabla de contenido