General Safety Rules; Noise And Vibration Information - Festool EHL 65 E Manual De Instrucciones Original

One handed planer
Technical data
Power
Speed (no load)
Plane width
Chip thickness
Max. rebate depth
Weight (excluding cable)
Degree of protection
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
Wear a protective mask!
1 Intended use
The tool together with the available Festool ac-
cessories is designed for processing wood, soft
plastics and similar materials.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1

General Safety Rules

WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
- Wait for the cutter to stop before setting the
tool down. An exposed cutter may engage the
surface leading to possible loss of control and
serious injury.
- Hold the power tool by insulated gripping
surfaces only, because the cutter may contact
its own cord. Cutting a „live" wire may make
exposed metal parts of the power tool „live" and
could give the operator an electric shock.
- Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the
EHL 65 E body leaves it unstable and may lead to loss of
720 W control.
15 600 rpm - Wear suitable personal protection equip-
65 mm ment:
0 - 4 mm
23 mm
2.4 kg
/ II
2.3

Noise and vibration information

The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Overall vibration levels (vector sum for three di-
rections) measured in accordance with EN 60745:
Vibration emission level (3 directions):
Uncertainty
The emission values specifi ed (vibration, noise)
were measured in accordance with the test con-
ditions stipulated in EN 60745 and are intended
for machine comparisons. They are also used for
making preliminary estimates regarding vibration
and noise loads during operation.
The emission values specifi ed refer to the main
applications for which the power tool is used. If the
electric power tool is used for other applications,
with other tools or is not maintained suffi ciently
prior to operation, however, the vibration and noise
load may be higher when the tool is used. Take into
account any machine idling times and downtimes to
estimate these values more accurately for a speci-
fi ed time period. This may signifi cantly reduce the
load during the machine operating period.
3 Power supply and start-up
The mains voltage must correspond to
the specifi cation on the rating plate.
To switch on, fi rst press the switch lock (2.5)
and then the switch (2.4) (press = ON, release =
OFF).
4 Electronics
The tool has full-wave electronics with
the following features:
9
Ear protection to reduce the risk
of damaging your hearing; Protec-
tive goggles; Face mask to reduce
the risk of inhaling harmful dust;
Protective gloves when handling
tools and coarse materials.
82 dB(A)
93 dB(A)
K = 3 dB
a < 2,5 m/s²
h
K = 1,5 m/s²