Storing And Caring For The Product; Troubleshooting; Disposal - Imetec MAX POWER ANIMAL CARE Instrucciones Para El Uso

STORING AND CARING FOR THE PRODUCT

When the appliance is not used, unplug it from the socket and store it in a dry and dust-free
place.
PROBLEM
The appliance does not go
on.
The appliance turns off dur-
ing use and does not turn
on again.
The vacuum cleaner does
not suction well.
The vacuum cleaner
produces odours the
first few times it is used
The turbo brush is not
spinning well and/or
gets stuck
pursuant to art. 26 of Italian legislative decree no. 49 of 14 March 2014 "Implementation
of directive 2012/19/eu on waste electrical and electronic equipment (Weee)", the
crossed bin symbol on the appliance or its packaging indicates that the product must
be disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for
electrical and electronic equipment.
alternatively, instead of handling the disposal, the appliance can be handed over to the
retailer when a new, equivalent appliance is purchased.
retailers of electronic products having a sales area of at least 400 m2 can also be handed
electronic products that are to be disposed of measuring less than 25 cm, free of charge
and with no obligation to buy.

TROUBLESHOOTING

• ensure that the plug is connected to the socket. Make
sure the oN/oFF button has been pressed(11)
• The vacuum cleaner is equipped with a protective
motor thermostat that shuts off the appliance in the
event of overheating! (caused by obstructing objects or
a clogged dust collection system). If triggered, switch
the appliance off by pressing the oN/oFF switch (11)
and let it cool down completely for a few hours. remove
any dust or the obstructing object before restarting the
appliance.
• electronic power control set to the minimum: Increase
the power to Medium or Max.
• The dust collection system is full: empty the dust
collection compartment
• The filter is clogged: clean or replace the filter
• The filter is not fastened correctly: make sure that the
filter is fitted correctly.
• These odours are harmless and disappear shortly
afterwards. ventilate the room.
• open the air nozzle slider 6c by moving it to the
right.

DISPOSAL

SOLUTION
EN
13