SEVERIN MW 7871 Instrucciones De Uso página 25

If required, the appliance may also be pre-heated. Select the desired temperature and press the rotary control
Example: the appliance is to be pre-heated to 190°C, followed by a cooking time of 20 minutes.
1. Press twice to select the desired temperature. The display shows 190 C.
2. Press the rotary control
pre-heating time.
3. Once the pre-set temperature is reached, a beep is heard repeated at intervals.
4. Open the door and put the food inside the oven compartment.
5. Close the door again.
6. Turn the rotary control
7. Press the rotary control
Note: The cooking time can only be set once the selected temperature has been reached, and the food has been placed
inside the oven compartment.
Note: Steps 2-3 can be omitted, if pre-heating is not required.
Microwave/hot-air combination programmes
For this combination, four programme settings are available.
Hot-air temperature: 110°C
140°C
170°C
200°C
The cooking time can be pre-set to a maximum of 9 hours and 30 minutes.
(Display 9H: 30)
Example: to programme the unit for a cooking time of 28 minutes at a temperature of 170°C.
1. Press repeatedly until the display shows 170°C.
2. Turn the rotary control
3. Press the rotary control
Setting multiple programmes
Prior to operation, the microwave can be set for up to 3 programmes to run consecutively, e.g. defrosting fi rst, followed by
the microwave and then the hot-air function. The multiple-programme feature can be used with any of the microwave, grill
and hot-air functions.
Example: using the defrost function fi rst, followed by the microwave and then the hot-air function.
1. Use the button to select a reduced microwave setting for defrosting.
2. Turn the rotary control
3. Use the button to select a high microwave setting.
4. Turn the rotary control
5. Use the button to select the required hot-air temperature.
6. Turn the rotary control
7. Press the rotary control
Note: The automatic cooking programmes and the quick-programme are not suitable for multiple programming.
If multiple programmes are set, the indicator
Hint: This memory function is especially helpful when using the microwave to cook food at different power settings. While a
higher power setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and
to ensure that the heat is evenly distributed when the food is already done.
Defrost programme:
This programme is useful for defrosting food by setting the defrosting time.
The defrosting time can be pre-set to a maximum of 95 minutes.
to start pre-heating. The display shows 30:00 and starts counting down from the selected
until the display shows H: 20.
to start the cooking process.
:
until the display shows H: 28.
to start the cooking process.
to select the required defrosting time.
to select the required microwave cooking time.
to select the required hot-air cooking time
to start the multiple programme selection.
is shown in the display.
.
25