Cleaning The Pressure Valve - Zavor EZLock Manual De Usuario

Cleaning the Pressure Valve

After every use, check to make sure that the Pressure Valve is clear of any built-
up particles. To do so, move the pressure valve to the steam position and remove
the valve (see detailed instructions below). Clean it by running water through it.
Next, lift the lid up to the light and look through the hole under the pressure valve.
Make sure you can see through it and there are no food particles blocking it. If
necessary, clean it with a small brush or pipe cleaner.
1. TO REMOVE THE PRESSURE VALVE FOR CLEANING PURPOSES:
Move the operating valve to the pressure release position. Jiggle the
pressure valve side to side as you pull it gently upwards to remove it from its
socket.
2. TO REPLACE THE VALVE AFTER CLEANING: Hold the pressure valve over
the vent pipe and push the pressure valve down until it is seated properly
into position.
17