Package Contents; Using The System - ECG BTS Elysium X1 Black Manual De Instrucciones

Features
• Wireless music playback (Bluetooth 4.2 stereo) and hands-free function
• Powerful amplifier with DSP (Digital Signal Processor)
• Analogue input AUX-IN – available to use as an external computer speaker, mobile phone, PSP/MP3/MP4
player etc.
• Equalizer with 3 preset profiles
• Playback from a 32GB Micro SD memory card with MP3/WMA/APE/FLAC formats support
• FM tuner
• Memory card reader and charging via the same USB cable
• Splashproof – IPX6 protection
• Voice guide – for changing modes and overall control
• Power bank – the player can be used as a power bank to charge phone or another device

Package contents

Wireless Bluetooth speaker, Micro USB cable, strap, Operating Manual

USING THE SYSTEM

Before using the device for the first time, fully charge the integrated battery.
If you do not plan to use the speaker for a longer period of time, charge the device once a month to prevent
problems of damage caused by an excessively discharged battery.
1. Turn the speaker ON/OFF
Long press 1 for 2 seconds to turn the speaker ON or OFF.
2. Bluetooth mode
1) Bluetooth pairing
Once on, the ECG indicator starts flashing. Next, enable Bluetooth on your mobile phone or other device
and initiate the search for Bluetooth devices. The BTS Elysium X1 device will appear among the available
devices. Connect to this device. Once connected, the speaker announces "Device paired" (Device paired)
and the LED indicator turns blue.
2) Wireless music playback
Simply start the playback on your mobile phone or music player and listen to music from your speaker.
3) Hands-free paired with your mobile phone
Accepting an incoming call
Short press 4 to accept an incoming call.
Hang up
Short press 4 again to hang up.
Redial
Double press 4 to initiate a call to the previously called number.
Private call
Press briefly the button 7 or 9 to be able to switch between the speaker and the phone during a call.
Reject an incoming call
Long press 4 to reject an incoming call.
4) Disconnect an existing Bluetooth connection
The speaker will automatically pair with the last known Bluetooth device. Long press 4 to disconnect
from the current Bluetooth connection, the speaker will indicate "Device disconnected". The speaker is
then ready to be paired with another device.
3. Playing music from micro SD card
After inserting the micro SD card (see fig.) into the speaker and briefly pressing the button 3 the speaker
switches to playback mode from the memory card and plays music directly from the micro SD card. The
speaker will indicate "Memory card mode" before playing.
Press briefly the button 8 to start/stop playback.
GB
31