Unit Specifications - Coltene BioSonic UC125H Manual De Usuario

6
XII. Order Information
Cat.No Description
Unit and accessories:
UC125H 100 Unit (100V, 50/60 Hz)
115 Unit (†115V, 50/60 Hz)
230CE Unit (230V, 50/60 Hz)
230UK Unit (230V, 50/60 Hz)
240 Unit (240V, 50/60 Hz)
UC155XD Accessory Kit
3/4 FingerGuard Basket, (2) Beakers,
(2) Covers, (2) Positioning Rings and (2)
Beaker Holders
UC151XD Full Size FingerGuard Basket
UC152XD 3/4 FingerGuard Basket
UC153 One Beaker Holder
UC350 Replacement Drain Filters
UC360 Replacement Drain Hose
UC53 600 ml Beaker with Cover and
Positioning Ring
Tank Solutions:
UC30 General Purpose Cleaning Solution
Concentrate in MeterDose
Dispensing Bottle (16 oz.)
UC32 Enzymatic Ultrasonic Cleaner
Concentrate in MeterDose
Dispensing Bottle (8 oz.)
UC34 Plaster & Stone Remover
Powder Concentrate in
Jar (1.85 lbs.)
UC38 Germicidal Ultrasonic Cleaning
Concentrate in MeterDose
Dispensing Bottle (8 oz.)
UC39 Cement Remover
Concentrate in MeterDose
Dispensing Bottle (16 oz.)
UC42 Germicidal Ultrasonic Cleaning
Concentrate in MeterDose
Dispensing Bottle (16 oz.)
XIII. Maintenance
A. Cleaning
All components should be cleaned
each day by wiping with a soft cloth
moistened with a commercially
available mineral deposit remover
followed by cleaning with isopropyl
alcohol or a mild disinfectant.
Do not use petroleum based
solvents, iodophors or pheno-
lic based products. (Iodophors
and phenolics can stain the
surface of the unit.) Clean up
all liquid spills immediately.
CAUTION! Rust deposits on tank can be
cleaned/removed with a com-
mercially available
steel cleaner.
B. Staimless Steel Cleaning
Qty
Allowable:
• Wash with a clean cloth or rag soaked
with warm water and mild soap or
1
1
liquid dish detergent.
1
• Always clean in the direction of the
1
original polish lines.
1
• Always rinse well with clear water (2
or 3 times) after cleaning. Wipe dry
completely.
1
• Specialized household stainelss steel
1
cleaner may also be used.
1
Do Not Use:
3
• Steel or stainless steel wool or scrapers
1
to remove stuburn debries.
1
• Harsh or abrasive cleaners.
• Do not let dirt accumulate.
Avoid:
• Cleaners that contain bleach.
®
473 ml
• Products that contain chloride, flouride,
lodide, or bromide.
236 ml
Chemicals harmful to use in the tank:
Acetophenone
840 g
Aluminum Floride
Aluminum Biflouride
236 ml
Ammonium Hydroxide
Antimony trichloride
Bromine
473 ml
Calcium Bisulfite
Chloracetic Acid
473 ml
Chlorine Anhydrous
Copper Fluoborate
Ferric Chloride
Ferric Sulfate
Flourine
Hydrochloric Acid
Hydroflouric Acid
Iodoform
Muriatic Acid
Sodium Hypochlorite
Stannic Chloride
Sulfuric Acid
C. Inspecting the Power Cord Periodically
check the power cord for damage and
see that the connectors at both ends of
the cord are fully seated.
stainless
D. Changing the Fuse
1. Remove the power cord from the wall
2. The fuse compartment is located
3. Gently remove the fuse from the fuse
4. Examine the fuse (Fig. 10). If blown,
5. Plug the power cord into the power
XIV. Unit Specifications
Transducers: 2
Aluminum Chloride
Aluminum Sulphate
UC125H unit
100 [100V 50/60 Hz, 137W (max.)]
Ammonium Chloride
Amyl Chloride
115 [115V 50/60 Hz, 137W (max.)]
Aqua Regia
230CE [230V 50/60 Hz, 137W (max.)]
Calcium Bisulfate
Calcium Hypochloride
230UK [230V 50/60 Hz, 137W (max.)]
Chloric Acid
240 [240V 50/60 Hz, 137W (max.)]
Copper Chloride
Ethyl Chloride
Operating Frequency:
Ferrous Chloride
Tank Capacity:
Fluoboric Acid
Hydrobromic Acid
Use Capacity:
Hydrocyanic Acid
Overall Dimensions:
Hydrofluosilicic Acid
Mercuric Chloride
Tank Dimensions:
Phosphoric Acid
Potassium Chloride
Fuse Type:
Stannous Chloride
Time Lag:
Zinc Chloride
100-115V
230-240V
EMC Class A: Suitable for use in all
establishments other than domestic and
those directly connected to a low-voltage
power supply network which supplies
buildings used for domestic purposes.
BioSonic
outlet first and then from the power
cord receptacle on the rear of the unit.
directly next to the power cord
receptacle. To access, take a small, flat-
headed screwdriver to the tab on the
fuse holder. Apply slight pressure to
release the fuse holder (Fig. 9).
holder.
replace with a fuse that matches the
unit's voltage and current (see section
XIV). If fuse appears to be in good
condition return the unit to your dealer
or Coltène/Whaledent.
cord receptacle on the rear of the unit.
Then plug the power cord into the wall
receptacle.
52 kHz
1.25 gallon or 4.75 L
1 gallon or 3.78 L
16.5 x 10.5 x 13.8 in.
42 X 27 X 36 cm
11.7 x 6.14 x 5 in.
29.7 x 15.6 x 12.7 cm
5 x 20 mm Cartridge
IEC 60127-2 Sheet 3
2 Amp
1 Amp
UC125
®