Product Overview; Control Panel Description - Chauvet DJ Geyser P5 Guía De Referencia Rápida

Product Overview

Penta-color LEDs
Nozzle
Controller In
LED Display
Menu Buttons
Rubber Feet for
Surface Mounting
(x4)
Manual Button
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Geyser P5. Make
sure you use FCQ regularly, no longer than 90 days between cleanings, to increase the life of
your product.
While operating the Geyser P5, make sure there is adequate fog fluid in the machine to prevent
pump and heater damage. When the fog fluid level becomes low, simply add more fog fluid to
continue using the Geyser P5.
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.

Control Panel Description

BUTTON FUNCTION
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
Enables the currently displayed menu or sets the currently selected value into the selected
<ENTER>
function
Geyser P5 QRG Rev. 2
QUICK REFERENCE GUIDE
DMX Fuse Power
In/Out Holder
Power Safety
In Switch
Fluid Tank
Fluid Level Indicator
Carry Handle
Fan
Loop
EN
2