Dyna-Glo M486BBDG14 Manual Del Usuario página 14

ASSEMBLY INSTRUCTIONS
13. Secure side burner assembly (S) to left side
burner table assembly (T) using 2 screws
(DD). Ensure side burner orifice placed into
the gas inlet tube of side burner. Install the
ignition wiring to the electrode assembly.
Hardware Used
DD M4x12 Screw
Correct
Wrong
Wrong
13
x 2
Side Burner Ignition Wire
Side Burner Gas
Inlet Tube
14
S
DD
Electrode Assembly
S
Side Burner Gas
Valve Assembly