Technical Data - Milwaukee M12 CIW12 Manual Del Usaurio

TECHNICAL DATA

Cordless Impact Screwdriver
Production code.......................................................................
Tool reception ..........................................................................
No-load speed 1st gear ...........................................................
No-load speed 2nd gear ..........................................................
Impact range 1st gear..............................................................
Impact range 2nd gear ............................................................
Torque 1st gear........................................................................
Torque 2nd gear ......................................................................
Max. diameter bolt / nut 1st gear .............................................
Max. diameter bolt / nut 2nd gear ............................................
Battery voltage.........................................................................
Weight according EPTA-Procedure 01/2003 (4.0 Ah) .............
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) .......................................
Sound power level (K = 3 dB(A)) ............................................
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
h
Impact tightening of fasteners of the maximum capacity of the tool .
Uncertainty K= ......................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may
contact hidden wiring. Fasteners contacting a „live" wire
may make exposed metal parts of the power tool „live" and
could give the operator an electric shock.
Wear ear protectors. Exposure to noise can cause hearing
loss.
Sawdust and splinters must not be removed while the
machine is running.
When working in walls ceiling, or floor, take care to avoid
electric cables and gas or waterpipes.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System C 12 chargers for charging System C 12
battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
14 ENGLISH
M12 CIW12 M12 CIW14 M12 CIW38
..........4471 37 01... ..... 4404 16 01... .... 4404 40 01...
..... ...000001-999999 . ...000001-999999 ...000001-999999
...........1/2" (13 mm) ............... 1/4" (6,35 mm) .........3/8" (10 mm)
......0-1500 min ............... 0-1200 min .............0-1200 min
-1 -1
......0-2650 min ............... 0-2650 min .............0-2650 min
-1 -1
......0-2650 min ............... 0-3000 min .............0-2650 min
-1 -1
......0-3500 min -1 ............... 0-4000 min -1 .............0-3500 min
............. 65 Nm .........................13 Nm ...................... 28 Nm
........... 160 Nm .........................56 Nm .................... 159 Nm
...... ≥ M10 (12.9) / ≥ M12 (8.8) ....≥ M6 (12.9) / ≥ M8 (8.8) ... ≥ M8 (12.9) / ≥ M10 (8.8)
...... ≥ M14 (12.9) / ≥ M16 (8.8) ..≥ M10 (12.9) / ≥ M12 (8.8) ≥ M14 (12.9) / ≥ M16 (8.8)
............. 12 V .............................12 V ......................... 12 V
............ 1,3 kg ..........................1,1 kg ....................... 1,1 kg
............. 93 dB (A) .....................84 dB (A) ................. 84 dB (A)
........... 104 dB (A) .....................95 dB (A) ................. 95 dB (A)
............ 9,3 m/s 2 .......................8,7 m/s 2 .................... 8,7 m/s
............ 1,5 m/s .......................1,5 m/s .................... 1,5 m/s
2 2
SPECIFIED CONDITIONS OF USE
The cordless impact wrench can be used to tighten and
loosen nuts and bolts wherever no mains connection is
available.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under "Technical Data" fulfills all the relevant
regulations and the directives 2011/65/EU (RoHs),
2006/42/EC, 2004/108/EC and the following harmonized
standards have been used:
EN 60745-1:2009 + A11:2010
EN 60745-2-2:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
Winnenden, 2013-12-02
Alexander Krug
Managing Director
Authorized to compile the technical file.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
New battery packs reach full loading capacity after 4 - 5
chargings and dischargings. Battery packs which have not
been used for some time should be recharged before use.
-1
Temperatures in excess of 50°C (122°F) reduce the
-1
performance of the battery pack. Avoid extended exposure
-1
to heat or sunshine (risk of overheating).
-1
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, after use, the battery packs have
to be fully charged.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling and short circuit
situations that cause high current draw, the tool will vibrate
for about 2 seconds and then the tool will turn OFF.
2
To reset, release the trigger.
2
Under extreme circumstances, the internal temperatur of the
battery could become to high. If this happens, the battery
will shut down.
Place the battery on the charger to charge and reset it.
INTENANCE
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Remove the battery pack before starting any
work on the machine.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their
life must be collected separately and returned to
an environmentally compatible recycling facility.
ENGLISH 15