Master Appliance Varitemp VT-750C Manual De Instrucciones página 9

Typical Applications
Speed Drying Parts
Parts and other materials can
be speed dried by waving the
heated air stream over the
work until dried.
Stretching, Shaping and
Installing Vinyl
Direct hot air stream at vinyl
section and wave heat gun in
a back and forth motion.
Stretch and shape until
wrinkles are removed. DO
NOT aim at glass.
(cont'd)
Defrosting Frozen Coils or
Pipes
Direct hot air stream at frozen
part and wave back and forth
until part is defrosted or
thawed.
Loosening Nuts and Bolts
Direct hot air stream at nut or
bolt to be loosened for a short
period of time. Heating the
nut or bolt will cause the
metal to expand. Remove the
air stream from work piece.
Loosen nut or bolt with proper
wrench.
9
If you have any questions
regarding your specific appli-
cation or use, feel free to call
our Customer Service Depart-
ment at (262) 633-7791.