topmark PARKER Instrucciones De Uso página 11

USING
HOW TO USE SECOND LAYER
6. Connect the zipper head, and close the zipper.
Fix the Velcro tape and cover the zipper puller.
5
6
7. Connect the tubes together by inserting to the inlay.
5
7
EN
8
8. Place the mattress inside.
To remove the layer, reverse the steps.
TO FOLD
1. Take out mattress base.
To unlock the second lock on the bottom: Push down the
middle part (2nd lock) with one hand and with the other
1
hand pull onto the red belt until
you hear a click to unlock this part
for folding. Than lift up the belt to
half height of the travel cot.
2
2. To unlock the top rails you have
to lift up and push the button (under the fabric near the arrow) at
once and then you have to bring down the top rail correctly in one
movement. Repeat for all rails.
3
3. Pull fully bottom strap and gather four stands to centre.
4. Wrap travel cot with mattress base. Fasten Velcro button.
4
4
5. Put travel cot into carry bag.
45
11