Setting The Temperature Control - Polar Refrigeration CE217 Manual De Instrucciones

The controls of your wine chiller
Power To switch on/off button must be held for 5 seconds
Light To control the inner light on/off
Up Used to increase the temperatures by 1°C
Down Used to decrease the temperature by 1°C
Select the temperature display setting in Fahrenheit or Celsius &
Pressed simultaneously will lock / unlock the control panel. When locked control panel
&
will be disabled
Wine Indicator
Lights

Setting the temperature control

1. When using the temperature controls for the first time, the LED will display the previous temperature
(the factory settings are 10°C for the upper zone and 16°C for the lower zone)
2. The degrees indicator will appear on the display marked
zone
3. The temperature settings of each zone is adjustable with the range 5-18°C (40-65°F)
NB: The temperature for the lower zone must ALWAYS be the same or higher
than the upper zone
4. The temperature increases by 1°C or 1°F if you touch the UP button once, and will decrease by 1°C
or 1°F if the DOWN button is touched once
5. When storing mainly red wine, the temperature should be set at 15-18°C, and the red LED will be lit
6. When storing mainly white wine, the temperature should be set at 9-14°C, and the green LED will be
lit
7. When storing mainly sparkling wine, the temperature should be set at 5-8°C, and the amber LED will
be lit
8. To view the current temperature of the chiller, press either the UP or DOWN button and the
temperature will flash on the display for five seconds
CE217-CE218_ML_A5_v7_20180403.indb 5
Red LED for
red wine
Green LED for white wine
Amber LED for
sparkling wine
for the upper zone and for the lower
UK
5
2018/4/3 14:01