Assembly Instructions - Dyna-Glo DGU951SDE Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Remove the pre-installed screws on the bottom of
the cabinet assembly (A). Attach each of the rear
casters (B) to the bottom of the cabinet assembly
(A) using 4 M5 x 12 (CC) screws per caster. Attach
the bottom of the front legs (C) to the bottom of the
cabinet assembly (A) using 3 M6 x 12 (BB) screws
per leg.
Hardware Used
M6 x 12 mm
BB
Screw
CC M5 x 12 mm
Screw
CAUTION: This unit is HEAVY! Do not attempt
2.
this step without assistance!
With the assistance of a helper, stand the smoker
upright on a firm and level surface. (Make sure
that legs and casters are firmly attached). Remove
the pre-installed screws on the back of the cabinet
assembly (A) and attach the rear handle (D) using
the pre-installed screws.
Hardware Used
M5 x 12 mm
CC
Screw
1
x 6
x 8
2
x 4
10
BB
A
B
DD
C
BB
CC
D
A