Easy Home VC9389A Manual Del Usuario página 10

Using the carpet cleaner
• Only use suitable (low-foaming) carpet cleaning solution. Us-
ing incorrect solutions may cause excess foaming, which will
prevent the carpet cleaner from working effectively.
• To reduce the risk of fire, do not use flammable or combusti-
ble liquid to clean a floor.
1. Unplug the carpet cleaner.
2. While holding on to the water solution tank
handle 9 upwards.
3. Tilt the water solution tank away from the carpet cleaner and
remove it.
4. Unscrew the water solution tank cap
counterclockwise.
5. Add cleaning solution, making sure to follow the instructions
on the bottle.
6. Fill the remainder of the water solution tank with warm tap
water (max. 104 °F (40 °C)) and replace the water solution
tank cap.
7. Place the water solution tank back into position by pushing it
down and into the carpet cleaner.
8. Push the water solution tank handle down until it clicks, locking into place.
Cleaning a carpet
CAUTION!
Risk of injury!
Improper handling of the carpet cleaner may cause injury.
− Make sure that the float is installed correctly before any
wet pick-up operation.
• Before cleaning, determine where to start and stop, making
sure you will not walk over previously cleaned areas.
• Do not oversaturate the carpet.
• For heavily soiled areas, additional applications may
be necessary.
14
4 , lift the water solution tank
3 by turning it