Home Decorators Collection 997-388 Manual De Instrucciones página 6

INSTALLATION & ASSEMBLY (cont.):
5. Place the Wall Plate (#10) over the Outlet Box (#4) and onto the Fixture
Mounting Screws (#6), and adjust the Fixture Mounting Screws (#6) until
they protrude out from the Wall Plate (#10) 1/4". Remove the Wall Plate
(#10) and secure the position of the Fixture Mounting Screws (#6) by
tightening the Hex Nuts (#9) against the Mounting Bracket (#7). Place the
Wall Plate (#10) back onto the Fixture Mounting Screws (#6), and secure it
into place using the Lock Nuts (#3) provided (Fig. 1).
6. After installing the fixture, caulk the upper
2/3s of the Wall Plate (#10) to mounting
surface. Leave the bottom 1/3 un-caulked
for drainage of any water that might leak
drainage of any water that might leak into
the enclosure.
recommends a non-drying exterior caulking
material. A good example is a clear
silicone rubber sealant for exterior use.
7. Install up to a 100 watt incandescent Light
Bulb in the socket of the Main Fixture
Body. Do not exceed a 100 watt
incandescent light bulb or 26 watt SBCFL
(Fig. 2).
8. Installation is complete. Turn on power at
the circuit breaker or fuse box. Turn the
light switch on to activate the fixture.
The manufacturer
Fig. 2
Page 6