Dexter 900ID2.5 Instrucciones Legales Y De Seguridad página 196

FR
2. SAFETY INSTRUCTIONS
ES
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate
PT
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and o .
IT
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
EL
c) Disconnect the plug from the power source and/or remove the
battery pack, if detachable, from the power tool before making
PL
any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
UA
accidentally.
d) Store idle power tools out of the reach of children and do not
RO
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
EN
untrained users.
e) Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may a ect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations di erent
from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
5. SERVICE
a) Have your power tool serviced by a quali ed repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
196