Holiday living 379-151136050-0 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Insert the two metal rods of each leg (B) into the
corresponding holes at the bottom of the body
(A).
Insert the metal hook at the lower part of the left
front leg into the corresponding hole on the right
front leg to secure them in position.
Repeat this step for the left and right hind legs.
2. Fasten each leg (B) to the body (A) using the
plastic ties (AA) provided.
Insert the metal rod of the tail (E) into the
corresponding hole at the rear of the body.
Hardware Used
Plastic Tie
3. Insert the two metal rods of the head and neck
(C) into the corresponding holes on the body
(A).
Insert the metal rod of each ear (D) into the
corresponding holes on the head and neck (C).
4. Fasten the head and neck (C) to the body (A)
using the plastic ties (AA) provided.
Adjust the decorative collar with bow to the
desired position
Secure the figure to the floor using the ground
stakes provided. Plug into a properly grounded
receptacle.
Hardware Used
Plastic tie
Ground stake
x 4
x 2
x 4
4
4
1
2
3
4