Before You Begin; Tools And Parts Needed; Parts Included; Installation Accessories - Gaggenau VR 230 620 Instrucciones De Instalación

en-us

Before you begin

Before you begin
T ools and parts needed
B e f o r e y o u b e g i n
▯ Phillips Head Screwdriver
Pencil
▯
▯ Drill with ¼" (6 mm) bit
Jigsaw
▯
Tape Measure
▯
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts included

Installation accessories

VD 200 020 Black appliance cover
VV 200 010 Stainless steel connection strip for
combining with other Vario 200
appliances
VV 200 020 Black connection strip for combining
with other Vario 200 appliances
Use the accessories only as indicated. The manufacturer
assumes no liability for incorrect usage of the
accessories.
6

Cabinet Requirements

The minimum spaces that must be maintained when
installing the electric grill shall be:
A
minimum 30" (762 mm)
B
minimum 8" (200 mm)
C
minimum 1 9
D
Stainless steel work surfaces: both work
surfaces must be permanently fitted on
both sides of the grill to protect the
countertop when the grill is installed
separately.
When installed next to another Vario
appliance, a work surface must be fitted
on the opposite side to protect the
countertop.
When installed between two other Vario
appliances, no work surface is required.
The distance from the top of the cooktop to the bottom of
cabinets above can be reduced to 24 inch when the
bottom of the wood or metal cabinet is protected by not
less than ¼ inch (6.35 mm)-thick flame-retardant
millboard covered with not less than No. 28 MSG sheet
metal, 0.015 inch (0.4 mm) stainless steel, 0.024 inch
(0.6 mm) aluminum or copper.
/ " (40 mm)
16