Husqvarna K 7000 Manual Del Usuario página 4

Product overview K 7000 SmartGuard
1. Rear handle
2. Switch for water supply
3. Front handle
4. Blade guard
5. Adjustment handle for the blade guard
6. SmartGuard handle
7. SmartGuard
8. Cutting equipment decal
9. Display
10. Water flow adjustment valve
11. Power trigger lockout
12. Power trigger
13. Information and warning decal
14. Flange, spindle and arbor bushing
15. Cutting blade (not supplied)
16. Belt tensioner
17. Front belt guard
18. Rear belt guard
19. Type plate
20. Water connection with filter, inlet
21. Water connection, outlet (return hose)
22. Power pack connection
23. HUSQVARNA high frequency power pack,
(necessary, not supplied)
24. Combination wrench
4
25. Bushing, decal and water connector
26. Operator's manual
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 9 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Personal protective
1635 - 003 - 20.08.2021