ASROCK Z170 Extreme4+ Manual Del Usuario página 29

CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.1, No. 3)
(4-pin CPU_FAN2)
(see p.1, No. 2)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 6)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 1)
hunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 22)
Serial Port Header
(9-pin COM1)
(see p.1, No. 24)
FAN_SPEED
FAN_VOLTAGE_CONTROL
FAN_SPEED_CONTROL
GND
12 24
1 13
8 5
1
4
RRXD1
DDTR#1
DDSR#1
CCTS#1
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
Z170 Extreme4+ / Z170 Extreme4
his motherboard pro-
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
his motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
his motherboard pro-
vides an 8-pin ATX 12V
power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
Please connect a hunderbolt
add-in card (AIC) to this
connector via the GPIO cable.
his COM1 header
supports a serial port
module.
TM
27