Publicidad
Idiomas disponibles
Idiomas disponibles
•
Set the panel heater in proper working position
EN
before connecting it to the mains.
•
Select a proper place for the appliance, taking into
account the safety precautions.
•
During initial operation or when the appliance has
not been used for a long period of time, subtle
odour or smoke may be emitted, it will disappear in
a short period of time during appliance operation.
•
There is power & turbo knob. There are 5 selections.
"II+ " is 2000W and Turbo working.
"I+ " is 800W and Turbo working.
"0" – is no power and turbo working.
"II" - is only 2000W.
"I" – is only 800W.
•
The appliance is equipped with thermo-regulator
sensitive to ambient temperature. You can turn
the thermo-regulator knob until the desired room
temperature is achieved (the size of the heated room
has to conform to the power of the appliance; in case
the desired room temperature can not be achieved,
an additional panel heater needs to be operated). You
can turn the thermostat knob clockwise to maximum
power and when the desired room temperature is
achieved you have to turn it counter-clockwise slowly
until you hear a "ticking" sound. Then the appliance
will maintain the air temperature in the room at the
adjusted level by switching on and off automatically.
•
The appliance has got an in-built anti-frost function.
In case you decide to use the appliance in a room,
where minimum temperature is to be maintained
(winter gardens, cellars or attics), the appliance has to
be adjusted to the desired heating level (level I, level
II or both), the thermostat knob has to be turned
counter -clockwise until it reaches the smallest
indicator circle . In this position the appliance will
maintain room temperature in the range of 5±2
it will periodically switch on and off, maintaining the
adjusted level of temperature comfort in the room.
•
The available power levels are presented indicatively.
It is compulsory for the appliance to be secured
when positioned in a room without supervision. The
appliance electric installation has to be equipped with
an automatic safety fuse; with a distance between its
contacts in disconnected state of at least 3 mm.
4
Usage and Storage Instructions
С, i.e.
о
Thermostat knob
Heater switch
CLEANING
•
It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait
until it cools down after disconnecting it from the
power socket.
•
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
•
Never immerse the appliance into water – there is
danger to your life from electric shock!
•
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.
STORAGE
•
Before putting away the panel heater let it cool
down after disconnecting it from the power socket.
•
Use the original packing for storing the panel heater
if it will not be used for a certain period of time. The
product can be protected from excessive dust and
dirt when it is kept in its original packing.
•
Never put a hot appliance into its packing!
•
The product has to be stored at a dry place away
from direct sunlight.
•
It is explicitly forbidden to store the appliance in
wet or damp premises.
PRODUCT PACKING SET INCLUDES:
Panel heater
Feet
Feet fixing screws
Manual
Guarantee certificate
TECHNICAL CHARACTERISTICS OF THE
APPLIANCE:
Model
Rated power
CN202ZF
2000W
Warning: in order to avoid overheating,
do not cover the appliance!
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
1 pc.
2 pcs.
2 pcs.
1 pc.
1 pc.
Rated voltage
Rated
frequency
230V~
50Hz
Publicidad
