RIDGID HD0600M0 Manual Del Usuario página 24

OPERATION
Polarized Plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will fit
in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any way.
With power cord plugged in, turn the Vac
"ON" by pressing in on the "I" (top) on the
Power Switch. To turn "OFF" press the
"O" (bottom) of the Power Switch. The
symbols used on the Switch Actuator are
international "On & Off" symbols.
1. The Filter must always be correctly
installed to avoid leaks and possible
Vac damage.
2. To maintain peak performance when
vacuuming fine dust, clean the Drum
and Filter more regularily than usual.
NOTE: Do not use a wet Filter when
picking up dry material. The Filter will
quickly clog and be difficult to clean.
3. If the Filter is wet, you must allow it to
dry completely or replace it with a dry
Filter before using the Vac to pick up
dry material.
ON/OFF
Switch
24