Intended Use; Electrical Safety - Facom CL3.CH18S Manual Original

Description (Fig. 1,2)
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
a. Trigger switch
b. Forward/reverse button
c. Anvil
d. Main handle
e. Battery release button

Intended use

This impact wrench is designed for professional impact fastening applications. The impact function makes this tool particularly useful for driving
fasteners in wood, metal and concrete.
DO NOT use under wet conditions or in presence of flammable liquids or gases. These heavy-duty impact wrenches are professional power
tools.
DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities, or for lack
of experience and/or for want of knowledge or skills unless they are supervised by a person responsible for their safety. Children should
never be left alone to play with this product.

Electrical safety

The electric motor has been designed for one voltage only. Always check that the battery pack voltage corresponds to the voltage on the
rating plate. Also make sure that the voltage of your charger corresponds to that of your mains.
Your FACOM charger is double insulated in accordance with EN 60335; therefore no earth is required.
If the supply cord is damaged, it must be replaced by a specially prepared cord available through the FACOM service organisation.
Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted :
• Safety dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plug. Recommended fuse : 3A.
Using an extension cable
An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your
charger. The minimum conductor size is 1mm
When using a cable reel, always unwind the cable completely.
Assembly and adjustements
WARNING: Prior to assembly and adjustment, always remove the battery pack. Always switch off the tool before inserting or removing the
battery pack.
WARNING: Use only FACOM battery packs and chargers.
Inserting and Removing the Battery Pack from the Tool (fig. 4)
WARNING: To reduce the risk of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and disconnect
battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.
NU-CL3.CH18S_1016.indd 22
SAVE THESE INSTRUCTIONS FOR FUTURE USE
f. Battery pack
g. Worklight
h. Hog ring
i. Speed selector
; the maximum length is 30m.
2
22
10/10/2016 14:53:46