2. INSTALLATION
2.1 PACKING AND STORING
All machines are packed in cardboard boxes specific for each unit.
The indications required to correctly handle the appliance while storing and installing it are written on the packing.
The storage temperature must be between -25°C and 55°C.
Note: Do not throw the packing away exteriors to avoid envi-
ronmental pollution.
Once the place in which the unit is to be installed has been cho-
sen (see the relative sections) proceed as follows to unpack the
two units:
Outdoor unit:
1.Cut the two nylon straps.
2.Remove the cardboard box.
3.Remove the nylon wrapping
2.2 CONTENT
Packagings contain the units as well as accessories and technical documentation for the use and installation.Check that the following
components are present.
Description
Condensation drain fitting
Manuals
26
EN
Image
Cod. 3QE46130 - Rev. 00 - 11/2019
DIAMANT S
fig. 3 -
Qty
1
1
Installation manual
Notes