Concept VP8290 Manual Del Usuario página 54

EN
OPERATING MANUAL –
ASSEMBLY OF THE VACUUM CLEANER
NOTE
Before fixing or removing accessories, always pull the plug out of the
electrical socket!
1. Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance's air suction inlet.
Insert the flexible hose into the appliance's air suction inlet and turn it.
You will hear a clicking sound - correct position has been reached.
When removing the flexible hose turn it the opposite way and remove
the hose. (Fig. 1)
When the slide throttle is closed, the air flow is stronger.
Slide throttle in open position – weaker air flow.
2. Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly.
The flap (Fig. 2) is used for setting the floor attachment to brushing (for
smooth floors), or to smooth vacuuming (for carpets).
ACCESSORIES
1. Slot nozzle
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots,
corners, pedestals, spaces between upholstery, and others.
USING THE APLIANCE
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and
mounted. Unwind the supply cable length you need. The yellow mark on the supply cable indicates the
optimum cable length. Do not unwind the supply cable beyond the red mark!
1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch on the appliance.
3. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage
outlet.
4. For winding up the supply cable, press the winding button with one hand and hold the supply cable with
the other hand to avoid uncontrolled movement.
CHECKING THE DUST COLLECTION BAG FILL
When the dust collection bag fill indicator turns red during operation, replace the full dust collection bag
immediately.
54
Fig. 1
Fig. 2
VP 82 90