⚫
Devices with class 1 construction should be connected to a main socket outlet with a
protective earthed connection.
⚫
Devices with class 2 construction do not require a earthed connection.
⚫
Always hold the plug when pulling it out of the main supply socket. Do not pull the
power cord. This can cause a short circuit.
⚫
Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or
electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
⚫
"Do not ingest battery, Chemical Burn Hazard" or equivalent working.
⚫
[The remote control supplied with] This product contains a coin/button cell battery. If
the battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
⚫
Keep new and used batteries away from children.
⚫
If the battery compartment does not close securely, stop using the product and keep it
away from children.
⚫
If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
29.
Caution about the use of Batteries:
⚫
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
⚫
Battery cannot be subjected to high or low extreme temperatures, low air pressure at
high altitude during use, storage or transportation.
⚫
Replacement of a battery with an incorrect type that can result in an explosion or the
leakage of flammable liquid or gas.
⚫
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
⚫
Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or that leakage of flammable liquid or gas.
⚫
A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
⚫
Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.
*
These instructions are related only to products using power cable or AC
power adaptor.
5