Reset Intervention - Thermal Restore; Emergency Stop; Start-Up Subsequent To An Emergency Stop; Standard Maintenance - Gentilin CS 240/03 Manual De Instruccions

Rev. 00 - 12/2013 - Cod. CM31710 -
28. RESET INTERVENTION – THERMAL RESTORE
In the instance where current overload and/or a short circuit of the appliance electrical system is noted, the thermal
restore intervenes, disabling the electric motor. To carry out the reset intervention, proceed as follows:
1) Turn the "ON-OFF" switch (3) to the "OFF (0)" position.
2) Press the thermal restore button (A).
3) Wait a few moments before restarting the appliance.
iF, aFtER CaRRYinG oUt tHERMal REStoRE, tHE aPPlianCE DoES not REStaRt, tHE QUaliFiED oPERa-
toR MUSt REQUESt tHE intERVEntion oF MaintEnanCE PERSonS anD/oR tHE aUtHoRiSED SUPPliER.
Appliance emergency stop can be carried out by turning the "ON-OFF" switch (3) to the "OFF (0)" position.
In order to avoid any possible danger, authorised operators must carry out the following operations.
1) IMMEDIATELY BRING THE "ON-OFF" SWITCH TO THE "OFF (0)" POSITION (3).
2) IMMEDIATELY NOTIFY THE "SAFETY MANAGER" (WHERE THE APPLIANCE IS USED IN A BUSINESS CONTExT) OF
THE EMERGENCY.

30. START-UP SUBSEQUENT TO AN EMERGENCY STOP

After having resolved the issues which offset the emergency, and checked that no damage and/or anomalies have been
caused to the appliance, with the consent of the safety manager (where the appliance is used in a business context) start
the appliance as described in Paragraph 26.
All activities carried out to ensure use and operation of the appliance, via various intervention types (regulation, valve checks,
cleaning of air filters, etc.) executed by the authorised maintenance person according to pre-established time intervals.
aUtHoRiSED oPERatoRS MUSt onlY CaRRY oUt oPERationS FoR WHiCH tHEY aRE QUaliFiED (SEE
PaRaGRaPH 6) anD WitH tHE ConSEnt oF tHE SaFEtY ManaGER (WHERE tHE aPPlianCE iS USED in a
BUSinESS ContEXt).
it iS FoRBiDDEn FoR aUtHoRiSED oPERatoRS to lEaVE tHE aPPlianCE UnSUPERViSED DURinG oPERation
anD MaintEnanCE intERVEntionS.
18
Instruction manual Compressor Mod. CS240
3

29. EMERGENCY STOP

31. STANDARD MAINTENANCE

A