Important Safety Instructions; Mounting Bracket - Spectro-UV Spectroline EDG-13H Manual Del Usuario

The EDGE™ 13 Series UV-A LED flood lamps must be used with a properly grounded
outlet. Please read the instructions in this manual carefully before using the unit.
Never use the equipment in any manner not specified in these instructions. The
lamp is completely safe when used as directed (see MOUNTING INSTRUCTIONS FOR
SAFE OPERATION). We recommend using Spectroline
and facewear. See REPLACEMENT PARTS AND ACCESSORIES for model
numbers. The available eye and facewear also improves the contrast between the
fluorescent area and the background.
The operator should stand away from the UV beam and not in a direct line of sight.
NOTE: No UV light should be seen on clothing or body parts. UV reflection on
clothing means the operator must move outside of the UV beam. For maximum
personal safety, we recommend using either the Spectroline
UVG-50 goggles or UVS-30 spectacles.
NOTE: Be sure to use genuine EDGE™ 13 replacement parts. Using another
manufacturer's replacement parts could affect product performance and will void
the lamp warranty.
NOTE: If the internal temperature of the unit becomes too high, it will turn off
automatically to prevent internal damage or to prevent improper use
(EDG-13H ONLY). In this case, allow the unit to cool down. The unit will turn on once a
correct operating temperature is reached.
MOUNTING INSTRUCTIONS FOR SAFE OPERATION
Secure two eyebolts to the mounting bracket. Attach one metal chain link to each
of the eyebolts (not supplied). You may also affix the unit to any location utilizing
the mounting bracket and bolts. Assure the anchor you are utilizing is secure and
can safely hold the weight of the unit.

IMPORTANT SAFETY INSTRUCTIONS

UV-absorbing protective eye
®
3
UVF-80 face shield,
®

Mounting Bracket

Adjustment Bolt